Software Options; Software Upgrade; Power On Self Test; Finisher Adjustment - Fuji Xerox ApeosPort-V 3065 Administrator's Manual

Software Options

This feature is for service representative use. For more information, contact our Customer
Support Center.

Software Upgrade

When EP system via the Internet is used, this feature is used to upgrade the software for EP
system when the version upgrade is required.
You can specify when to start the software upgrade.
Important
After the downloading is finished, the machine automatically restarts and upgrades the software. After the
machine restarts again and the Services Home screen is displayed, the software upgrade is completed.
Note
EP system may not be available in your region. For more information, contact our Customer Support Center.
To use this feature, a dedicated contract is needed in addition to a use of the EP system service. For more
information, contact our Customer Support Center.
Reference
For information on EP system, refer to "EP System" (P.730).
1
Select [Software Upgrade].
Start Upgrade
Starts a version upgrade soon.
Schedule Upgrade
Select [On] and specify the date and time to start a version upgrade.

Power on Self Test

Set whether or not to perform self test when the machine is turned on and started up.
If any abnormal condition such as intentional program modification is found during the
program diagnosis, the machine stops starting up and records the information in the audit
log.
Note
The information may not be recorded in the audit log depending on the status of program malfunction.
If the machine does not start, contact our Customer Support Center.
Check Smart Card Details
When you select [Check Smart Card Details] and touch your smart card to the smart card
reader, the information of the smart card appears on the touch screen.
Note
You can register the authentication information using CentreWare Internet Services. For more information,
refer to the help of CentreWare Internet Services.
Important
To display the online help for CentreWare Internet Services, users need to have the environment to connect
to the Internet. The communication fee shall be borne by you.

Finisher Adjustment

This feature is displayed only when the Finisher-B1 (optional), the Booklet Maker Unit for
Finisher-B1 (optional), or the Hole Punch Unit (optional) is installed.
Common Service Settings
145
5