Table of Contents
Advertisement
Appendix
Setting Item
Collate
Layout
Paper size
Process mode
16
658
Item
Number
404
Selects whether to print multiple-sheet documents as collated sets (1, 2, 3...1,
2, 3...).
[0] (Default): Off
[1]: On
405
Sets the layout for printing.
Note
This item can be set when [PDF Bridge] is selected for [Process Mode].
[0] (Default) : Auto %
[1]: Booklet
[2]: 2-up
[3]: 4-up
[4]: 100% (size-by-size)
The [Auto %] setting automatically calculates the largest magnification
possible to fit to the output paper size.
The [Booklet] setting prints the images side by side, on both sides of each
page, in the correct order to make a booklet based on the layout of the
original PDF file. Some documents may not be printed in a booklet fashion
depending on the structure of their pages. In this case, they will be printed
with the [Auto %] setting.
Note
When [A4] is selected for [Paper Size], documents will be printed on A4 size paper.
When [Paper Size] is set to [Auto], documents will be printed on A3 or A4 size paper.
The [2-up] setting prints two pages onto one sheet of paper. When [2-Up] is
selected, the paper size is fixed at A4.
The [4-up] setting prints four pages on each sheet of paper. When [4-Up] is
selected, the paper size is fixed at A4.
406
Sets the size of the paper to be printed.
[0] (Default) : Auto
[1]: A4
The [Auto] setting automatically determines the paper size, based on the size
and settings of a PDF file to be printed.
408
Sets the print processing mode when you use the PDF Direct Print feature.
[0](Default): PDF Bridge
[1]: PS
[PDF Bridge] processes PDF files using the PDF Direct Print feature provided
by Fuji Xerox.
[PS] processes PDF files using the PostScript feature provided by Adobe.
Note
This item is displayed when the Adobe PostScript 3 Kit (optional) is installed.
The print results may differ between the [PDF Bridge] and [PS] selections.
When [PS] is selected, the [Layout] setting becomes invalid.
Value
Advertisement
Table of Contents
