Table of Contents
Advertisement
Appendix
Alphanumeric
fonts
Position
adjustment
Number of sets
Print control
16
672
112
Sets the font for single-byte characters.
Reference
For more information on fonts, refer to "Internal Fonts" (P.633).
[0] (Default) : Stroke
[1] : Roman
[2] : Sans serif
113
Adjusts the hard clip area vertically or horizontally. You can set from -250
(Vertical
mm to +250 mm in 1 mm increments.
position
[0] (Default) : Does not move the hard clip area.
adjustment)
[1] - [250] : -250 to -1 mm
[251] - [500] : +1 to +250 mm
114
(Horizontal
Important
position
Data outside the printable area is not printed regardless of the adjustment of the
adjustment)
print position. In addition, data moved outside the printable area as a result of
adjusting the print position is not printed.
115
Sets the method for specifying the print sets.
[0] (Default) : Protocol
[1] : Panel
[2] : Command
150
Selects a graphics language. This setting affects to IW, OW, and UC of HP-
(HP-GL mode)
GL/2 commands.
[0] (Default) : HP-GL
[1] : HP-GL/2
Note
To print HP-GL/2 command that does not include BP command, select [HP-GL/2].
Advertisement
Table of Contents
