Interrupt Mode - Fuji Xerox ApeosPort-V 3065 Administrator's Manual

Interrupt Mode

This feature is effective for the Copy service.
Select whether or not to enable the Interrupt mode. Select from [Disabled] and [Enabled].
This feature is available for accounting/billing devices other than Card Activated -
Cumulative and Smart Card Reader.
Job with Insufficient Credit
This feature is effective for the Copy, Print, and Scan services.
Select the operation of the machine when the amount remaining in the accounting/billing
device becomes insufficient. Select from [Delete Job Immediately] and [Hold Job].
This feature is available for accounting/billing devices other than Card Activated -
Cumulative and Smart Card Reader.
Charge Print Jobs
This feature is effective for the Print service.
Select how the print job performed is charged. Select from [Charge by Card Number] and
[Do not Charge by Card Number].
This feature is available for Card Activated - Cumulative and Card Activated - Subtractive.
Track with Cumulative Device
This feature is effective for the Copy and Print services.
Select the timing that the amount for copy or print job is charged. Select from [Track with
Accounting Device] and [High Speed Printing].
This feature is available for Card Activated - Cumulative.
Scan Ahead for Copy Job
This feature is effective for the Copy service.
Select whether or not to enable the Scan Ahead feature for copy jobs. Select from
[Disabled] and [Enabled].
This feature is available for Card Activated - Cumulative, and Card Activated - Subtractive.
Important
Some of the products listed above may not be available for this feature depending on the types and settings.
For information on the products available for this feature and on how to change the settings, contact our
Customer Support Center.
Accounting
5
293