Fuji Xerox ApeosPort-V 3065 Administrator's Manual page 683

Hide thumbs Also See for ApeosPort-V 3065:
Table of Contents

Advertisement

If the Scaling Mode Setting is Paper Size
If the paper size and the document size are the same, select paper that is the same size as
the document.
If the document size is larger than any possible paper sizes, select the largest paper.
If the document size is smaller than any possible paper sizes, select the smallest paper.
If the Scaling Mode Setting is ACA
Select the smallest paper size that can contain the ACA.
If the active coordinates area is larger than any possible paper sizes, select the largest
paper.
If the active coordinates area is smaller than any possible paper sizes, select the smallest
paper.
Note
If the document size is set to anything other than Auto, the paper size is the one set on the control panel.
If the paper tray is set to Auto, the paper size is the one loaded in each tray. However, If paper whose size is
not supported is loaded, an error message will be displayed prompting the user to load a supported paper.
How to Determine the Scaling Ratio
When auto scaling is being used, although the scaling ratio is determined by document size
and paper size, it differs according to the scale mode setting.
Note
To activate scaling, set the scaling to ON on the [HP-GL/2 - Programming] screen. If it is set to OFF, it is
plotted at the same scale (100%).
If the Document Size is Auto and the Scaling Mode is Paper Size
The hard clip setting is inactive. The hard clip area is always the paper's hard clip area.
If the document size = paper size, it plots at the same scale (100%).
If the document size > paper size, it plots at a reduced scale.
If the document size < paper size, it plots at the same scale (100%).
Document
Size
If the origin position of the plotting position is Layout, the document is placed and drawn in
the center.
If the origin position is bottom left or center, the origin of the document and the paper are
aligned and drawn.
Paper Size
A3
A0
35
A1
50
A2
71
A3
100
A4
100
A5
100
A4
A5
25
100
35
25
50
35
71
50
100
71
100
100
HP-GL/2 Emulation
B4
B5
31
100
43
31
61
43
87
61
100
87
100
100
Unit: Percent (%)
683
16

Advertisement

Table of Contents
loading

Table of Contents