Fuji Xerox ApeosPort-V 3065 Administrator's Manual page 510

Problem Solving
15
510
Error Code
017-738 [Cause] Data could not be sent due to an internal error.
017-739
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
017-740 [Cause] Data could not be sent due to a plug-in acticvation failure.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
017-741 [Cause] The job flow cannot be activated.
[Remedy] Take one of the following measures:
017-742 [Cause] An error occurred while connecting to the forwarding server.
[Remedy] Check the network connection and the address of the
forwarding server.
017-743 [Cause] Cannot login to the forwarding server.
[Remedy] Confirm the user ID and the passwork.
017-744
[Cause] An error occurred while connecting to the forwarding server.
[Remedy] Confirm the followings: You can access to the same path using a
computer. There is enough memory capacity left in the storage
destination.
017-745 [Cause] Data could not be sent due to the lack of hard disk memory
capacity.
[Remedy] Take one of the following measures:
017-746 [Cause] A hard disk error occurred.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
017-747 [Cause] Connection to ApeosWare Authentication Agent to the
database timed out because of an overload.
[Remedy] Wait for a while, and then execute the operation again. If the
same message is displayed again, contact our Customer
Support Center.
017-748 [Cause]
Data could not be sent due to the incorrect machine setting.
[Remedy] Confirm the network setting of the machine.
017-749 [Cause] An error occurred.
[Remedy] Confirm the job flow settings.
Cause and Remedy
Install the latest plug-in.
Confirm the jobflow settings.
Send with lower resolution.
Send in smaller size.
Send with fewer pages by deviding the job.
Send with [Black & White] set as the [Output Color].