Fuji Xerox ApeosPort-V 3065 Administrator's Manual page 380

Using the Internet Fax Service
2) Select [Other Settings].
3) Select [Protocol to Receive E-mail], and then select [Change Settings].
4) Select either [SMTP] or [POP3] as appropriate for your environment.
5) Select [Save].
6) Select [Close] repeatedly until the [Tools] screen is displayed.
4
Configure the server settings for receiving e-mails.
1) Select [Connectivity & Network Setup].
2) Select [Outgoing/Incoming E-mail Settings].
When [SMTP] is selected for [Protocol to Receive E-mail]
Configure the SMTP server.
When [POP3] is selected for [Protocol to Receive E-mail]
Configure the POP3 server.
5
Configure the server settings for sending e-mails.
11
6
Configure the domain filtering for sending and receiving e-mails as necessary.
7
Set up the S/MIME information.
1) Select [Connectivity & Network Setup].
2) Select [Security Settings].
380
Reference
For information on how to configure the SMTP server, refer to "SMTP Server Settings" (P.190).
For information on how to set the machine's e-mail address when you receive e-mails via SMTP, refer to
"Machine's E-mail Address/Host Name" (P.182)".
Reference
For information on how to configure the POP3 server, refer to "POP3 Server Settings" (P.190).
For information on how to set the machine's e-mail address when you receive e-mails via POP3, refer to
"Machine's E-mail Address/Host Name" (P.182).
Important
When you enable POP over SSL in the POP3 Server Setting, receiving e-mail will be encrypted. POP over SSL
can be set using CentreWare Internet Services. For information on the setting procedure, refer to
"Configuring Machine Settings Using CentreWare Internet Services" (P.313).
Note
To send e-mails, SMTP server settings are required. When [POP3] is selected in [Protocol to Receive E-mail],
configure the SMTP server in [Outgoing/Incoming E-mail Settings].
Reference
For information on how to configure the e-mail transmission, refer to "SMTP Server Settings" (P.190).
Reference
For information on how to configure the domain filtering, refer to "Domain Filtering" (P.203).