Fuji Xerox ApeosPort-V 3065 Administrator's Manual page 500

Problem Solving
15
500
Error Code
016-700 [Cause] The job was suspended because the number of the digits for the
Secure Print or Charge Print passcode set on the print driver was
less than the value specified in [Minimum Passcode Length for
Stored Job] on the machine.
[Remedy] On the print driver, set the passcode string equal to or longer
than the value specified in [Minimum Passcode Length for
Stored Job].
016-701 [Cause] Unable to process print data because of insufficient memory.
[Remedy] Stop unnecessary ports or delete unnecessary data to increase
memory.
016-702 [Cause] Unable to process print data because of insufficient print page
buffer.
016-703 [Cause] The machine received an e-mail specified with an invalid folder
number.
[Remedy] For errors occurring during fax or Internet fax transmission:
Contact our Customer Support Center.For errors occurring
during e-mail/fax/Internet fax reception:Take one of the
following measures:Register the specified folder number, and
request the sender to send the e-mail/fax/Internet fax
again.Request the sender to send to an available folder.If the
error still is not resolved, contact our Customer Support Center.
016-704
[Cause] The folder is full, and hard disk capacity is insufficient.
[Remedy] Delete unnecessary files from the folder, and save the file.
Reference
Refer to "Send from Folder" > "Checking/Operating Files in a Folder in the User Guide.
016-705 [Cause] Probable causes are as follows:
1) You have specified the machine for the folder registry for the
2) You have not used the print driver for the machine.
[Remedy] For 1), press the <Services Home> button, and check whether
[Scan to PC] is displayed. If [Scan to PC] is displayed, then check
whether the scanned document can be stored in a folder. If
unable to store it in the folder, install the Scanner Kit (optional).
For 2), use the print driver appropriate for the machine.
016-706
[Cause] The hard disk space is insufficient because the number of
Secure Print users exceeded the maximum limit.
[Remedy] Delete unnecessary files from the machine, and delete
unnecessary Secure Print users.
Reference
For more information on deleting users for Secure Print files, refer to "Job Status" > "Printing
and Deleting Stored Jobs", and on folders, refer to "Send from Folder" > "Checking/Operating
Files in a Folder" in the User Guide.
016-707 [Cause] Unable to print with the Sample Set feature because the hard
disk is not installed.
[Remedy] To use the Sample Set feature, the hard disk must be installed.
Contact our Customer Support Center.
Cause and Remedy
scanned document. However, the Scanner Kit (optional) is not
installed.