Fuji Xerox ApeosPort-V 3065 Administrator's Manual page 24

Before Using the Machine
3
Select [Tools] on the Services Home screen.
Note
4
Select [System Settings] > [Common Service Settings] > [Power Saver Settings].
1
5
Select [Power Saver Timers], and then select [Change Settings].
6
Using[
increments.
From Last Operation to Low Power Mode
Set the time to elapse from the last operation until the machine enters the Low Power
mode.
Note
24
When the Services Home screen is not displayed on the touch screen, press the <Services Home> button.
]and[ ], set the time to elapse until entering the Power Saver mode, in 1 minute
The default value for [From Last Operation to Low Power Mode] is [1] minutes.You cannot disable the Low
Power mode.