Fuji Xerox ApeosPort-V 3065 Administrator's Manual page 674

Hide thumbs Also See for ApeosPort-V 3065:

Table of Contents

Print control

Number of holes

Emulation target

Pen attributes

Sets the paper margin when auto scaling is being used.

(Papermargin)

[0] - [99] (Default: 0) : 0 to 99 mm

The setting of the paper margin is valid when [Document size] is set to [Auto].

Sets whether to perform image enhancement, which artificially increases the

(Imageenhanc

resolution of an image and smooth its edges.

[1] (Default) : ON

Sets the stapling position.

[0] (Default) : None

[1]: Top Left

[2]: Top Double

[3]: Top Right

[4]: Left Double

[5]: Right Double

[6]: Bottom Left

[7]: Bottom Double

[8]: Bottom Right

[1] (Default): Yes

Select the position for punching holes.

[0](Default): None

Select the number of punch holes.

[0] (Default) : 2 holes

Select the machine to emulate.

[0] (Default): HP750

800-815 (Pen

Set the width (thickness of the line) of the 16 pens (No. 00 to 15). You can set

width) (No. 0-

the width from 0.0 to 25.5 mm in 0.1 mm increments. No. 00 denotes Item

[0] - [255] (Default: 3) : 0 to 25.5 mm

If the image is reduced by concern with the relationship between [Document size]

and [Paper size] settings, the pen width is reduced accordingly to 0.1 mm at the

The width of the line gets thick symmetrically with respect to the center of the line.

If the width is set to 0.0 mm, nothing is plotted.