Tools
Address Book
When the server address is registered on the Address Book, you can specify the address
from the Address Book. The specified address appears in the [Transfer via FTP (1)] or
[Transfer via FTP (2)] screen.
Reference
File Format
Specify an output file format.
Reference
Resend Attempts
Set whether or not to try sending again if a transmission fails. If you select [On], set the
number of resend attempts and interval.
Set the transmission retry count from 1 to 5.
Set the transmission retry interval from 30 to 300 seconds.
5
Name, Server, Save in, User Name, and Password
Select [Name], [Server], [Save in], [User Name], or [Password] to display an input screen.
The numbers of characters you can input are as follows:
Transfer via SMB (1), Transfer via SMB (2)
Specify where SMB forwarding is to be stored.
[Transfer via SMB (2)] will be displayed when [Transfer via SMB (1)] is configured.
Address Book
When the server address is registered on the Address Book, you can specify the address
from the Address Book. The specified address appears in the [Transfer via SMB (1)] or
[Transfer via SMB (2)] screen.
File Format
Specify an output file format.
Resend Attempts
Set whether or not to try sending again if a transmission fails. If you select [On], set
thenumber of resend attempts and interval.
Set the transmission retry count from 1 to 5.
268
For more information on the Address Book, refer to "Add Address Book Entry" (P.271).
For more information on the [File Format] screen, refer to "Scan" in the User Guide.
Resend Attempts
Resend Interval
Name: Up to 18 single-byte characters
Server: Up to 64 single-byte characters
Save in: Up to 128 single-byte characters
User Name: Up to 97 single-byte characters
Password: Up to 32 single-byte characters
Resend Attempts