Fuji Xerox ApeosPort-V 3065 Administrator's Manual page 254

Tools
Note
4
Configure other settings as necessary.
Server Name
Enter the access destination name with up to 32 single-byte characters.
Description
Enter the description of the access destination with up to 128 single-byte characters.
Use User ID
5
Allows you to enter a user ID and password into [User ID] and [Password] respectively,
which are used when the machine accesses the remote service.
User ID
Enter the User ID to access the remote service with up to 128 characters.
Important
Note
Password
Enter the password for the User ID with up to 128 characters.
Machine/Authentication Notification
Set whether or not to notify the remote server of machine information and user
authentication information every time the machine connects to the remote service.
Note
Notify User Authorization Information
Set whether or not to notify the remote service of user authorization information every
time the machine connects to the remote service.
254
- http-v5://[2001:DB8::1234] (IPv6)
When the URL is specified with V3, V4 (new version) is used for connection.
Begin with "https" for a protocol with an encryption feature.
No
When [Login Type] is set to [Login to Remote Accounts]: The machine accesses the
remote service using the user information authenticated on the machine.
When [Login Type] is set to [No Login Required] or [Login to Local Accounts]: The
machine prompts the user to input User ID and password to access Web applications.
Yes
Depending on the settings on the remote service, the entry for [User ID] may be invalid. Check the settings on
the remote service.
Along with [User ID], set also [Password]. [User ID] will be invalid unless [Password] is set.
All the specified settings are ignored if the remote service to be connected requires other than a user ID and
its password for authentication.
The remote service determines whether to use the information. No need to configure settings on the control
panel.