Fuel Pump (Low Pressure Side) Removal/Installation - TOHATSU 200 Series Service Manual

dummyhead dummyhead
FUEL SYSTEM
FUEL PUMP (LOW PRESSURE SIDE)
REMOVAL/INSTALLATION
Gasoline is highly flammable and explosive.
You can be burned or seriously injured when
handling fuel.
• Keep heat, sparks, and flame away.
• Wipe up spills immediately.
• Handle fuel only outdoors.
(*) Refer
(BF175AK1·200AK1·225AK1: 62ZY300).
Remove the intake manifold (page 5-75*).
Set a commercially available fuel tube clamp to the fuel
tube D.
FUEL PUMP (LOW PRESSURE SIDE)
V TUBE (3.5 x 6.5 x 350 mm)
WIRE
HARNESS CLIP
BOLT
(8 x 32 mm)
FUEL DRAIN SCREW
1.5 N·m (0.15 kgf·m, 1.1 lbf·ft)
BOLT (8 x 45 mm)
FUEL DRAIN VALVE
5-48
to page of base
O-RING (37 x 2.4 mm)
WASHER (8 mm)
O-RING
TUBE CLIP B12 (2)
shop manual
TUBE CLIP B8
FUEL TUBE G
FUEL TUBE C
FUEL TUBE
CLAMP
FUEL TUBE D