34
INSTALLATION
115
1. Propeller
2. Thrust holder
3. Bush
5
4. Stopper
5. Washer
6. Propeller nut
7. Split pin
5. Tighten the propeller nut to speci-
fied torque with holding the propel-
ler by wood block. And align one of
grooves to propeller shaft hole.
Propeller nut torque:
35 N·m (25 ft·lb, 3.5kgf·m)
6. Install a new split pin into the nut
hole and bend it.
7
4
5
3
1
2
ENOF01336-0
ENOF00084-B
ENOM00971-0
5. TOCS (Tohatsu Onboard
Communication System)
installation
6
TOCS (Tohatsu Onboard Communication
System) interface coupler can provide
information regarding engine speed,
fuel consumption, and various malfunc-
tion via an optional interface cable.
Contact authorized Tohatsu dealer for
more detail.
30, 40, 50
75, 90, 115
ENOF01338-0
ENOF01314-0