Changing The Turn Indicator Light Bulbs; Changing The Brake Light Bulbs - Ducati 2006 Monster S2R 1000 Workshop Manual

Table of Contents

Advertisement

sezione / section
P 5
1
A
2
5
5
Monster S2R 1000
- M.Y. 2006 - edizione/edition 00
Impianto elettrico
Electric system
Sostituzione lampadine
Sostituzione lampadine per
indicatori di direzione
Svitare la vite (1) e separare la
coppetta (2) dal supporto (3) indicatore.
La lampadina ha un innesto a
baionetta, per estrarla occorre
premere e ruotarla in senso antiorario.
Per rimuovere il supporto (3), fare
riferimento per gli indicatori di
direzione anteriori alla Sez. P 4,
mentre per gli indicatori di direzione
posteriori alla Sez. H 7.
3
Sostituire la lampadina e reinserirla
premendo e ruotando in senso orario
fino allo scatto nella sede.
Rimontare la coppetta inserendo il
dentino (A) nell'apposita fessura
del supporto indicatore.
Serrare la vite (1).
Sostituzione lampadine per
luce arresto
Per la sostituzione della lampada luce
arresto e posizione è necessario
svitare le due viti (4) che fissano il
4
trasparente (5) e rimuoverlo.
La lampadina ha un innesto a
baionetta, per estrarla occorre
premere e ruotarla in senso antiorario.
Sostituire la lampadina e reinserirla
premendo e ruotando in senso orario
fino allo scatto nella sede.
Rimontare il trasparente (5).
Changing light bulbs
Changing the turn indicator
light bulbs
Loosen screw (1) and detach lens (2)
from turn signal light mount (3).
The bulb has a bayonet-type base:
to remove it, push it in and turn it
counter-clockwise.
To remove the support (3), refer
to Sect. P 4 for the front turn
indicators, and to Sect. H 7 for
the rear turn indicators.
Push in the new bulb and turn it
clockwise until it clicks into place.
Refit the lens by inserting the tab (A)
in the corresponding slot in the turn
signal.
Tighten screw (1).

Changing the brake light bulbs

To change the brake light bulb,
loosen the two screws (4) securing
the lens (5) and remove it.
The bulb has a bayonet-type base:
to remove it, push it in and turn it
counter-clockwise.
Push in the new bulb and turn it
clockwise until it clicks into place.
Refit lens (5).
A
B
C
D
E
F
G
H
L
M
N
P
49

Advertisement

Table of Contents
loading

This manual is also suitable for:

Monster s2r1000

Table of Contents