Printhead Cable Removal - Lexmark Medley 4012-009 Service Manual

4012-0XX

Printhead Cable Removal

1. Unplug the machine before beginning any electrical service. The
power key does not remove power from the electronics.
2. Open the top cover.
3. Remove the print cartridge.
4. Remove the carrier.
5. Remove the cable clip [A] from the left side of the carrier.
6. Remove the pointer from the front of the carrier.
A
7. Remove the two sensor mounting screws.
8. Push down the two latches that secure the cradle to the carrier
and pull the cradle up from the carrier.
9. Remove the printhead cable from the alignment pins.
The new cable comes without the folds in it. Place the new cable
next to the old cable and fold the new cable in the appropriate
places.
43