Stapler Cable Removal - Lexmark MX61 Series Service Manual

6
Remove the two screws (B) securing the fuser.
Note: For a video demonstration, see the Fuser Remove and Install Video at
http://infoserve.lexmark.com/videos/MSX_fuser.html

Stapler cable removal

1
Remove the right cover. See
2
Remove the rear cover. See
3
Remove the controller board shield. See
4
Disconnect the stapler cable (J56) from the controller board.
"Right cover removal" on page
"Rear cover removal" on page
"Controller board shield removal" on page
Repair information
347
277.
343.
7016
284.