Remote Conference Group Setup - NEC SL2100 Programming Manual

SL2100
Level:
SA
Description
Use Program 20-34 : Remote Conference Group Setup to define the Remote Conference options.
Program
20 Input Data
Item
No.
01 Conference
Name
02 Password
03 Max participants
04 Max Conference
Duration
05 End Tone Alert
Time
08 Automatic Re-
cording
09 Recording Desti-
nation Mail Box
Conditions
None
2-226
Program 20 : System Option Setup

20-34 : Remote Conference Group Setup

Remote Conference Group Number
Item Input Data
Up to 12 characters
4 digits Fixed
(0 ~ 9, @ = wild char-
acter)
0 ~ 16
0 ~ 64800 seconds
0 ~ 64800 seconds
0 = Disable
1 = Enable
1 ~ 128
Description
Enter the name displayed at the
time of a Remote Conference. This
entry will display on the keyset LCD.
Define the password of a Remote
Conference.
Define the maximum number of par-
ticipants of a Remote Conference.
Define the maximum duration of a
Remote Conference.
When this time passes, the confer-
ence is disconnected by the
SL2100.
Determine how long prior discon-
necting a Remote Conference call
(based on the maximum conference
duration above) the SL2100 should
send out a beep. This is used to
warn the conference participants of
the pending disconnect.
Enable or Disable automatic record-
ing for a Remote Conference. If dis-
abled, a line key must be used to
start recording.
Enter the mailbox number where re-
cordings are to be stored.
This is the mailbox number not
the extension number for a mail-
box.
Program 20 : System Option Setup
ISSUE 2.0
1 ~ 4
Default Related
Program
Group1 = Conf1
Group2 = Conf2
Group3 = Conf3
Group4 = Conf4
Group1 = 1111
Group2 = 2222
Group3 = 3333
Group4 = 4444
8
7200
300
0
No Setting 47-02