Toyota 2GR-FE Manual page 1001

7
CHECK WIRE HARNESS (INSTRUMENT PANEL J/B - BATTERY AND BODY GROUND)
Wire Harness Side:
IA
IF
OK
8
INSPECT INSTRUMENT PANEL J/B
Wire Harness Side:
Front Side:
ACC Relay
Terminal
2GR-FE STARTING – SMART KEY SYSTEM
(a) Disconnect the IF and IA J/B connectors.
(b) Measure the resistance according to the value(s) in the
table below.
Standard resistance
Terminal No.
IF-10 - Body ground
(c) Measure the voltage according to the value(s) in the
table below.
Standard voltage
Terminal No.
IA-1 - Body ground
NG
A128037E03
(a) Measure the resistance according to the value(s) in the
table below.
IF
Condition
Always
Condition
Always
REPAIR OR REPLACE HARNESS OR
CONNECTOR
Back Side:
ST–139
Specified Condition
Below 1 Ω
Specified Condition
10 to 14 V
ST
II
B138003E01