Toyota 2GR-FE Manual page 1016

2GR-FE STARTING – IGNITION RELAY (w/ Smart Key System)
IGNITION RELAY (w/ Smart Key
System)
ON-VEHICLE INSPECTION
1.
E034090E19
INSPECT NO. 2 IGNITION RELAY
(a) Using an ohmmeter, measure the resistance
between each terminal.
Standard resistance
Tester Connection
3 - 5
If the result is not as specified, replace the No. 2
ignition relay.
ST–151
Specified Condition
10 kΩ or higher
Below 1 Ω (Apply battery voltage
between terminals 1 and 2)
ST