Toyota 2GR-FE Manual page 1000

ST–138
Wire Harness Side:
ACCD
OK
ST
2GR-FE STARTING – SMART KEY SYSTEM
Main Body ECU
E7
(b) Disconnect the II J/B connector.
(c) Measure the resistance according to the value(s) in the
Terminal No. (Symbol)
II-3 - E7-22 (ACCD)
E7-22 or II-3 - Body
NG
table below.
Standard resistance
Condition
Always
Always
ground
REPAIR OR REPLACE HARNESS OR
CONNECTOR
II
B138001E02
Specified Condition
Below 1 Ω
10 kΩ or higher