14.3.2.2 Removing the UFM
Figure 253: Removing the UFM (A)
Ê Remove the nylon screw on the defective UFM.
Ê Disconnect and remove the defective UFM.
Ê The UFM spacer remains on the system board.
14.3.2.3 Concluding steps
"Reassembling" on page 61
Ê
"Connecting the server to the power source" on page 66
Ê
"Switching on the server" on page 67
Ê
"Enabling BitLocker functionality" on page 92
Ê
14.3.3 Replacing the UFM
Upgrade and Repair Unit
(URU)
Tools: – Phillips PH0 / (+) No. 0 screw driver
– combination pliers and flat nose pliers
RX2540 M1
Upgrade and Maintenance Manual
System board and components
Hardware: 10 minutes
Software: 5 minutes
371