Ricoh D146 Service Manual page 989

Main SP Tables-2-2
[Thick2:SwitchTimingLeadEdge]
2516
Sets switch timing for paper transfer ampere leading edge correction per
thickness / printing sides.
003 Paper Transfer:1side
004 Paper Transfer:2side
[Thick2:TrailEdgeCorrection]
2517
Sets output value [%] for paper transfer ampere trailing edge correction per
thickness / printing sides.
003 Paper Transfer:1side
004 Paper Transfer:2side
[Thick2:SwitchTimingTrailEdge]
2518
Sets switch timing for paper transfer ampere trailing edge correction per
thickness / printing sides.
003 Paper Transfer:1side
004 Paper Transfer:2side
[Thick3:Bias:BW]
2523
Sets paper transfer ampere per thickness / mode (FC/BW) / printing sides.
003 PaperTransfer:1side
004 PaperTransfer:2side
D146/D147/D148/D149/D150
*ENG [0 to 50 / 0 / 2mm/step]
*ENG [0 to 50 / 0 / 2mm/step]
*ENG [0 to 995 / 100 / 5%/step]
*ENG [0 to 995 / 100 / 5%/step]
*ENG [0 to 50 / 0 / 2mm/step]
*ENG [0 to 50 / 0 / 2mm/step]
[0 to (D146: 200, D147: 200, D148:
*ENG 250, D149: 250, D150: 250) / 11 /
1-uA/step]
[0 to (D146: 200, D147: 200, D148:
*ENG 250, D149: 250, D150: 250) / 15 /
1-uA/step]
2-270 System Maintenance Section