Ricoh D146 Service Manual page 1306

RCG Error Cause
014
Displays RCG connection error. cause
RCG – C Registed
021
This SP displays and selects the RCG-N connection method.
connect type(N/M)
023
Displays the connection type of the NRS G/W and Cumin.
The value will be changed after installation completed in the case of dial-up
connection.
Cert Expire Timing
061
Sets the date for expiration notification.
Use Proxy
062
This SP setting determines if the proxy server is used when the machine
communicates with the service center.
Proxy Host
This SP sets the address of the proxy server used for communication between
the RCG device and the gateway. Use this SP to set up or display the customer
proxy server address.
The address is necessary to set up the embedded RCG-N.
063
§
The address display is limited to 128 characters. Characters beyond the
128 character are ignored.
§
This address is customer information and is not printed in the SMC
report.
System Maintenance Section
[0 or 1 / 0 / 1/step]
CTL 0: Initial state, normal condition
1: Error
[0 or 1 / 0 / 1/step]
*CTL 0: Installation not completed
1: Installation completed
[0 or 1 / 0 / 1/step]
*CTL 0: internet connection
1: Dial-up connection
[0 to 0xffffffff / 0 / 1/step]
*CTL 0: Not use
1: Use
[0 or 1 / 0 / 1/step]
*CTL 0: Not use
1: Use
*CTL [- / - / -]
2-587 D146/D147/D148/D149/D150
Main SP Tables-5