Ricoh D146 Service Manual page 1315

Main SP Tables-5
Retransmission Limit
Normally, it is best to allow unlimited time for certification and ID2 update
requests, and for the notification that the certification has been completed.
174
However, RCG-M generates charges based on transmission time for the
customer, so a limit is placed upon the time allowed for these transactions.
If these transactions cannot be completed within the allowed time, do this SP to
cancel the time restriction.
FAX TX Priority
187
This SP determines whether pushing the off-hook button will interrupt a RCG-M
transmission in progress to open the line for fax transaction. This SP can be
used only if SP5816 164 is set to "0".
Manual Polling
200
Performs center polling when executed.
Regist Status
Displays the installation status as the target of NRS services.
0 Not installed as NRS machines or Cumin.
Installing as Cumin. Box enrollment has completed. Unable to response
1
201 for the machine serching from Basil at this status.
Installation has completed. Unable to response for the machine serching
2
from Basil at this status.
As a NRS machine, installation has completed. It cannot install as
3
Cumin.
4 NRS modules is not being launched.
Letter Number
202
Sets the request number that is required to install Cumin.
D146/D147/D148/D149/D150
CTL [- / - / -]
[0 or 1/ 0 / 1/step]
CTL 0: Disable
1: Enable
[- / - / -]
CTL
[Execute]
[0 to 4 / 0 / 1/step]
CTL
[Execute]
*CTL [- / - / -]
2-596 System Maintenance Section