Ricoh D146 Service Manual page 1335

Main SP Tables-5
This SP is used for the scan router program.
Rapid Sending Control
022
Enables or disables the prevention function for the continuous data sending
error.
5846 [UCS Setting]
Machine ID (for Delivery
Server)
001
Displays the unique device ID in use by the delivery server directory. The value
is only displayed and cannot be changed. This ID is created from the NIC MAC
or IEEE 1394 EUI. The ID is displayed as either 6-byte or 8-byte binary.
Machine ID Clear(for Delivery
Server)
Clears the unique ID of the device used as the name in the file transfer
002
directory. Execute this SP if the connection of the device to the delivery server
is unstable. After clearing the ID, the ID will be established again automatically
by cycling the machine off and on.
Maximum Entries
Changes the maximum number of entries that UCS can handle.
003
If a value smaller than the present value is set, the UCS managed data is
cleared, and the data (excluding user code information) is displayed.
Delivery Server Retry Timer
006
Sets the interval for retry attempts when the delivery server fails to acquire the
delivery server address book.
Delivery Server Retry Times
007
Sets the number of retry attempts when the delivery server fails to acquire the
delivery server address book.
Delivery Server Maximum
008
Entries
D146/D147/D148/D149/D150
[0 or 1 / 1 / -/step]
*CTL 0: Control disabled
1: Control enabled
*CTL [- / - / -]
[- / - / -]
*CTL
[Execute]
*CTL [2000 to 20000 / 2000 / 1/step]
*CTL [0 to 255 / 0 / 1/step]
*CTL [0 to 255 / 0 / 1/step]
*CTL [2000 to 20000 / 2000 / 1/step]
2-616 System Maintenance Section