Ricoh D146 Service Manual page 1383

Main SP Tables-6
Adjusts width (main scan direction) of jogger when running conformity to
except the specified paper.
§
Adjusts value to -: move towards jogger width is tighter than base value.
§
Adjusts value to +: move towards jogger width is wider than base value.
[Main-scan Punch Pos Adj:1K FIN]
Adjusts position of width direction (main scan direction) for punch.
6144
§
Adjusting value to -: hole position moves toward front side of machine.
§
Adjusting value to +: hole position moves toward rear side of machine.
001 JPN/EU: 2-Hole
002 NA: 3-Hole
003 Europe: 4-Hole
004 NEU: 4-Hole
005 NA: 2-Hole
[Skew Correct Buckle Adj:1K FIN]
Adjusts the skew correction bending amount when punching specified paper.
6145
§
Adjusts value to -: buckling amount decreases
§
Adjusts value to +:buckling amount increases.
001 A3 SEF
002 B4 SEF
003 A4 SEF
004 A4 LEF
005 B5 SEF
006 B5 LEF
007 A5 LEF
008 DLT SEF
009 LG SEF
010 LT SEF
D146/D147/D148/D149/D150
ENG
ENG
ENG [-2.0 to 2.0 / 0.0 / 0.4mm/step]
ENG
ENG
ENG
ENG
ENG [-5.0 to 5.0 / 0.0 / 0.2mm/step]
ENG
ENG
ENG
ENG
ENG [-5.0 to 5.0 / 0.0 / 0.2mm/step]
ENG
ENG
2-664 System Maintenance Section