Ricoh D146 Service Manual page 1294

Jam Detection: Time Length
011
Sets the time a jam must remain before it becomes an "unattended paper jam".
This setting is enabled only when SP5508-004 is set to "1".
Jam Detection: Continuous
Count
012
Sets the number of consecutive paper jams required to initiate a call. This
setting is enabled only when SP5508-004 is set to "1".
Door Open: Time Length
013
Sets the length of time the door remains open before the machine initiates a
call. This setting is enabled only when SP5-508-004 is set to "1".
[SC/Alarm Setting]
With @Remote in use, these SP codes can be set to issue an SC call when an
5515
SC error occurs. If this SP is switched off, the SC call is not issued when an SC
error occurs.
001 SC Call
002 Service Parts Near End Call
003 Service Parts End Call
004 User Call
006 Communication Test Call
007 Machine Information Notice
008 Alarm Notice
009 Non Genuine Tonner Ararm
Supply Automatic Ordering
010
Call
Supply Management Report
011
Call
012 Jam/Door Open Call
System Maintenance Section
*CTL [3 to 30 / 10 / 1min./step]
*CTL [2 to 10 / 5 / 1time/step]
*CTL [3 to 30 / 10 / 1min./step]
*CTL
*CTL
*CTL
*CTL
*CTL
*CTL [0 or 1 / 1 / 1/step]
0: OFF
*CTL
1: ON
*CTL
*CTL
*CTL
*CTL
2-575 D146/D147/D148/D149/D150
Main SP Tables-5