Ricoh D146 Service Manual page 1474

[ADF Org Feeds]
8221
These SPs count the number of pages fed through the ADF for front and back
side scanning.
Front
Number of front sides fed for scanning:
With an ADF that can scan both sides simultaneously, the Front side count is
001
the same as the number of pages fed for either simplex or duplex scanning.
With an ADF that cannot scan both sides simultaneously, the Front side count
is the same as the number of pages fed for duplex front side scanning. (The
front side is determined by which side the user loads face up.)
Back
Number of rear sides fed for scanning:
With an ADF that can scan both sides simultaneously, the Back count is the
002
same as the number of pages fed for duplex scanning.
With an ADF that cannot scan both sides simultaneously, the Back count is
the same as the number of pages fed for duplex rear-side scanning.
§
When 1 sheet is fed for duplex scanning the Front count is 1 and the Back count is 1.
§
If a jam occurs during the job, recovery processing is not counted to avoid double counting.
Also, the pages are not counted if the jam occurs before the first sheet is output.
[Scan PGS/Mode]
8231
These SPs count the number of pages scanned by each ADF mode to
determine the work load on the ADF.
Large Volume
001
Selectable. Large copy jobs that cannot be loaded in the ADF at one time.
SADF
002
Selectable. Feeding pages one by one through the ADF.
Mixed Size
003
Selectable. Select "Mixed Sizes" on the operation panel.
004 Custom Size
System Maintenance Section
*CTL [0 to 9999999 / 0 / 1 / step]
*CTL [0 to 9999999 / 0 / 1 / step]
*CTL [0 to 9999999 / 0 / 1 / step]
*CTL [0 to 9999999 / 0 / 1 / step]
*CTL [0 to 9999999 / 0 / 1 / step]
*CTL [0 to 9999999 / 0 / 1 / step]
2-755
Main SP Tables-8
D146/D147/D148/D149/D150