Ricoh D146 Service Manual page 1331

Main SP Tables-5
WEP key Select
011
Selects the WEP key.
WPA Debug Lvl
045
Selects the debug level for WPA authentication application.
This SP is displayed only when the IEEE802.11 card is installed.
5841 [Supply Name Setting]
001 Toner Name Setting:Black
002 Toner Name Setting:Cyan
003 Toner Name Setting:Yellow
004 Toner Name Setting:Magenta
007 OrgStamp
011 Staple Std1
012 Staple Std2
013 Staple Std3
014 Staple Std4
021 Staple Bind 1
022 Staple Bind 2
023 Staple Bind 3
D146/D147/D148/D149/D150
[00 to 11 / 00 / 1binary/step]
00: Key #1
*CTL 01: Key #2 (Reserved)
10: Key #3 (Reserved)
11: Key #4 (Reserved)
[1 to 3 / 3 / 1/step]
1: Info
*CTL
2: wArning
3: error
*CTL
Specifies supply names. These
*CTL
appear on the screen when the
*CTL user presses the Inquiry button in
the user tools screen.
*CTL
[0 to 20 / NULL / 1byte/step]
*CTL
*CTL
Specifies supply names. These
*CTL
appear on the screen when the
*CTL user presses the Inquiry button in
the user tools screen.
*CTL
[0 to 20 / NULL / 1byte/step]
*CTL
*CTL Specifies supply names. These
appear on the screen when the
user presses the Inquiry button in
*CTL
the user tools screen.
[0 to 20 / NULL / 1byte/step]
2-612 System Maintenance Section