2. SP MODE TABLES
2.1 SERVICE TABLE KEY
Notation
[range / default/step]
*
DFU
Japan only
SSP
FSP
System Maintenance Section
What it means
Example: [-9 to +9 / 0 / 0.1 mm step]. The setting
can be adjusted in the range ±9, value reset to
+3.0 after an NVRAM reset, and the value can be
changed in 0.1 mm steps with each key press.
Value stored in NVRAM. After a RAM reset, this
default value (factory setting) is restored.
Denotes "Design or Factory Use". Do not change
this value.
The feature or item is for Japan only. Do not
change this value.
This denotes a "Special Service Program" mode.
This denotes a "Factory Service Program" mode.
2-1
Service Table Key
D146/D147/D148/D149/D150