Ricoh D146 Service Manual page 1359

Main SP Tables-6
T-Edge Erase (1-Pass):
Rear
For 1 path simultaneous duplex models only. Adjusts the rear side trailing edge
register.
§
Value increase: add trailing edge to image.
015
§
Value decrease: erases trailing edge of image.
Adjusts to max. value in the adjustment range, when set value is larger than
adjust range. When finishing setting without defining, remains as the last set
value. Sets initial setting to -1.5mm instead of 0mm considering originals
shadow.
[ADF INPUT Check]
6007
See page 3-1
[ADF OUTPUT Check]
6008
See page 3-31
6009 [ADF FreeRun]
Free Run Simplex Motion
001
Runs simplex free run when setting original to ADF.
Free Run Duplex Motion
002
Runs duplex free run when setting original to ADF.
Free Run Stamp Motion
003
Runs simplex free run (with DONE stamp) when setting original to ADF.
Free Run Simplex
Motion(low speed)
004
Runs paper existing simplex free run of ADF in low line speed.
Free Run Simplex
Motion(high speed)
005
Runs paper existing simplex free run of ADF in low line speed.
D146/D147/D148/D149/D150
*ENG [-5.0 to 5.0 / -1.5 / 0.1 mm/step]
ENG [0 or 1 / 0 / 1/step]
ENG [0 or 1 / 0 / 1/step]
ENG [0 or 1 / 0 / 1/step]
ENG [0 or 1 / 0 / 1/step]
ENG [0 or 1 / 0 / 1/step]
2-640 System Maintenance Section