Ricoh D146 Service Manual page 1313

Main SP Tables-5
Outside Line Outgoing
Number
The SP sets the number that switches to PSTN for the outside connection for
embedded RCG-M in a system that employs a PBX (internal line).
§
If the execution of SP5816-151 has succeeded and embedded RCG-M has
connected to the external line, this SP display is completely blank.
154
§
If embedded RCG-M has connected to an internal line, then the number of
the connection to the external line is displayed.
§
If embedded RCG-M has connected to an external line, a comma is
displayed with the number. The comma is inserted for a 2 sec. pause.
The number setting for the external line can be entered manually (including
commas).
Dial Up User Name
Use this SP to set a user name for access to remote dial up. Follow these rules
when setting a user name:
156
§
Name length: Up to 32 characters
§
Spaces and # allowed but the entire entry must be enclosed by double
quotation marks (").
Dial Up Password
Use this SP to set a password for access to remote dial up. Follow these rules
when setting a user name:
157
§
Name length: Up to 32 characters
§
Spaces and # allowed but the entire entry must be enclosed by double
quotation marks (").
Local Phone Number
Use this SP to set the telephone number of the line where embedded RCG-M is
161
connected. This number is transmitted to and used by the Call Center to return
calls.
Limit: 24 numbers (numbers only)
D146/D147/D148/D149/D150
CTL [- / - / -]
CTL [up to 32 / - / 1/step]
CTL [up to 32 / - / 1/step]
CTL [up to 24 / - / 1/step]
2-594 System Maintenance Section