Ricoh D146 Service Manual page 1348

SMTP Auth. From Field
Replacement
022
Determines whether the FROM item of the mail header is switched to the
validated account after the SMTP server is validated.
SMTP Auth. Direct Setting
Selects the authentication method for SMPT.
Bit switch:
Bit 0: LOGIN
Bit 1: PLAIN
025
Bit 2: CRAM MD5
Bit 3: DIGEST MD5
Bit 4 to 7: Not used
§
This SP is activated only when SMTP authorization is enabled by UP
mode.
S/MIME: MIME Header
026
Selects the MIME header type of an E-mail sent by S/MIME.
S/MIME: Authentication
Check
028
Specifys whether to check destination certificate when sending S/MIME mail.
5866 [Email Report]
001 Report Validity
System Maintenance Section
[0 to 1 / 0 / 1/step]
*CTL 0: No. "From" item not switched.
1: Yes. "From item switched.
*CTL [0 to 255 / 0 / - /step]
[0 to 2 / 0 / 1 /step]
0: Microsoft Outlook Express
*CTL standard
1: Internet Draft standard
2: RFC standard
[0 to 1 / 0 / 1/step]
*CTL 0: No (not check)
1: Yes (check)
[0 or 1 / 0 / 1/step]
CTL 0: Enabled
1: Disabled
2-629 D146/D147/D148/D149/D150
Main SP Tables-5