Ricoh D146 Service Manual page 1330

Reso: Scanner(Mono)
128
Selects the resolution for BW scanning mode. This is basically adjusted by the
remote system.
All Addr Info Switch
141
-
142 Stand-by Doc Max Number
5840 [IEEE 802.11]
Channel Max
Sets the maximum number of channels available for data transmission via the
006
wireless LAN. The number of channels available varies according to location.
The default settings are set for the maximum end of the range for each area.
Adjust the upper 4 bits to set the maximum number of channels. DFU
§
Do not change the setting.
Channel Min
Sets the minimum number of channels available for data transmission via the
007
wireless LAN. The number of channels available varies according to location.
The default settings are set for the minimum end of the range for each area.
Adjust the lower 4 bits to set the minimum number of channels. DFU
§
Do not change the setting.
System Maintenance Section
[0 to 255 / 3 / 1/step]
0:600DPi
1:400DPi
2:300DPi
*CTL
3:200DPi
4:150DPi
5:100DPi
6:75DPi
*CTL [0 or 1 / 1 / 1/step]
*CTL [10 to 10000 / 2000 / 1/step]
[1 to 11 or 13 / 11 or 13 / 1 /step]
*CTL Europe/Asia: 1 to 13
NA/ Asia: 1 to 11
[1 to 11 or 13 / 1 / 1/step]
*CTL Europe: 1 to 13
NA/ Asia: 1 to 11
2-611 D146/D147/D148/D149/D150
Main SP Tables-5