Ricoh D146 Service Manual page 1380

010 LT-Y
011 8K-T
012 16K-T
013 16K-Y
014 Other
[Staple Position Adj: FrontFIN]
Adjusts staple position (main scan direction) for the near side parallel stitch/ far
6133
side parallel stitch of specified paper.
§
Adjusting value to -: staple position moves toward front side of machine.
§
Adjusting value to +: staple position moves toward rear side of machine.
001 Finisher1
6134 [Finisher Free Run: FrontFIN]
Free Run1
001
Execute shift mode no paper free run.
Free Run2
002
Execute staple mode no paper free run.
Free Run3
003
Tray package position move free run.
Free Run4
004
Do not use with RUBICON-B.
[INPUT Check: FrontFIN]
6135
See page 3-1
[OUTPUT Check: FrontFIN]
6136
See page 3-31
System Maintenance Section
*ENG [-3.0 to 3.0 / 0.0 / 0.5mm/step]
*ENG [-3.0 to 3.0 / 0.0 / 0.5mm/step]
*ENG [-3.0 to 3.0 / 0.0 / 0.5mm/step]
ENG [-3.0 to 3.0 / 0.0 / 0.5mm/step]
ENG [-3.0 to 3.0 / 0.0 / 0.5mm/step]
*ENG [-2.0 to 2.0 / 0.0 / 0.5mm/step]
*ENG [0 or 1 / 0 / 1/step]
*ENG [0 or 1 / 0 / 1/step]
*ENG [0 or 1 / 0 / 1/step]
*ENG [0 or 1 / 0 / 1/step]
2-661
Main SP Tables-6
D146/D147/D148/D149/D150