Ricoh D146 Service Manual page 1360

Free Run Duplex
Motion(low speed)
006
Runs paper existing duplex free run of ADF in high line speed.
Free Run Duplex
Motion(high speed)
007
Runs paper existing duplex free run of ADF in high line speed.
[Stamp Position Adj.]
Adjusts stamping position of DONE stamp.
§
Value increase: Moves stamping position of DONE stamp towards original
6010
trailing edge.
§
Value decrease: Moves stamping position of DONE stamp towards original
leading edge.
001 -
[1-Pass ADF INPUT Check]
6011
See page 3-1
[1-Pass ADF OUTPUT Check]
6012
See page 3-31
[Original Size Detect Setting]
Sets to judge as witch original size for two original sizes that can not be judged
6016
with ADF. Size of each bit is different depending on region. Set corresponding
bit to "0" when to prior the default size. Set "1" to let the switching size judge.
001 -
[DF Magnification Adj.]
6017
Fine-tunes scale error. Changes line speed corresponding to scale rate setting
value.
System Maintenance Section
ENG [0 or 1 / 0 / 1/step]
ENG [0 or 1 / 0 / 1/step]
*ENG [-5.0 to 5.0 / 0.0 / 0.1 mm/step]
*ENG [0 to 255 / 0 / 1/step]
2-641
Main SP Tables-6
D146/D147/D148/D149/D150