Ricoh D146 Service Manual page 804

Do not change. Pressure setting welding pressure: thick paper 4:
Pressure:Special3:Low Speed
163
Do not change. Pressure setting welding pressure: special paper 2: low speed
Filler Edge Detection Counter
201
Do not change. Times detecting filler edge
1152 [Fusing Nip Band Check]
Execute
001
Measure nip.
Pre-idling Time
002
Do not change. Measuring fusing nip width before measure rotate time
Stop Time
003
Do not change. Measuring fusing nip width stop time
Pressure Position
004
Do not change. Measuring fusing nip width pressuring position
1153 [Abnormal Noise Confirmation]
Unit: Execute
001
Do not change. Abnormal sound check control (Mode not available)
Operation Line Speed
003
Do not change. Operating line speed of abnormal sound check control
Operation Time
004
Do not change. Operating time of abnormal sound check control
005 Heat Center Target Temp
System Maintenance Section
*ENG [0 to 3 / 2 / 1/step]
ENG [0 to 9000000 / 0 / 1/step]
ENG [0 or 1 / 0 / 1/step]
*ENG [0 to 999 / 300 / 1sec/step]
*ENG [0 to 100 / 20 / 1sec/step]
*ENG [1 to 2 / 2 / 1/step]
ENG [0 or 1 / 0 / 1/step]
[0 to 2 / 0 / 1/step]
0: Std Speed
ENG
1: Mid Speed
2: Low Speed
ENG [0 to 240 / 60 / 1sec/step]
ENG [100 to 180 / 130 / 1deg/step]
2-85
Main SP Tables-1
D146/D147/D148/D149/D150