Ricoh D146 Service Manual page 1268

2.7 MAIN SP TABLES-5
2.7.1 SP5-XXX (MODE)
[Add Display Language]
Adds language available in user choice. (Only the languages registered in the
machine)
Refer to the displayed language list to set in the way showed below.
List Number Assigned Bit Switch
No.1 to 8 BIT1 to 8 (SP5009-201)
5009
No.9 to 16BIT1 to 8 (SP5009-202)
No.17 to 24BIT1 to 8 (SP5009-203)
No.25 to 32BIT1 to 8 (SP5009-204)
Example: To add American(No.3 in the list) or Czech (No.15)
Turn Bit 3 of "SP5009-201" 0 to 1 for American.
Turn Bit 7 of "SP5009-202" 0 to 1 for Czech.
After setting, turn the main power switch off and on to make the setting valid.
201 Bit SW
202 Bit SW
203 Bit SW
204 Bit SW
[mm/inch Display Selection]
5024
Display units (mm or inch) for custom paper sizes.
001 0:mm 1:inch
System Maintenance Section
*CTL [1 to 255 / 0 / 1/step]
*CTL [1 to 255 / 0 / 1/step]
*CTL [1 to 255 / 0 / 1/step]
*CTL [1 to 255 / 0 / 1/step]
[0 or 1 / 1(USA), 0(Others) /
1/step]
*CTL
0: mm
1: inch
2-549 D146/D147/D148/D149/D150
Main SP Tables-5