Ricoh D146 Service Manual page 1314

Connection Timing Adjustment
Incoming
When the Call Center calls out to an embedded RCG-M modem, it sends a
repeating ID tone (*#1#). This SP sets the time the line remains open to send
162
these ID tones after the number of the embedded RCG-M modem is dialed up
and connected.
The actual amount of time is this setting x 2 sec. For example, if you set "2" the
line will remain open for 4 sec.
Access Point
This is the number of the dial-up access point for RCG-M. If no setting is done
for this SP code, then a preset value (determined by the country selected) is
163
used.
Default: 0
Allowed: Up to 16 alphanumeric characters
Line Connecting
This SP sets the connection conditions for the customer. This setting dedicates
the line to RCG-M only, or sets the line for sharing between RCG-M and a fax
164
unit.
§
If this setting is changed, the copier must be cycled off and on.
§
SP5816 187 determines whether the off-hook button can be used to
interrupt a RCG-M transmission in progress to open the line for fax
transaction.
Modem Serial No.
173
This SP displays the serial number registered for the RCG-M.
System Maintenance Section
CTL [0 to 24 / 1 / 1/step]
CTL [0 to 16 / 0 / 1/step]
[0 to 1 / 0 / 1/step]
CTL 0: Sharing Fax
1: No Sharing Fax
CTL [- / - / -]
2-595 D146/D147/D148/D149/D150
Main SP Tables-5