Ricoh D146 Service Manual page 1466

Staple
003
Number of jobs started in Staple mode.
Booklet
004
Number of jobs started in Booklet mode. If the machine is in staple mode, the
Staple counter also increments.
Z-Fold
005
Number of jobs started In any mode other than the Booklet mode and set for
folding (Z-fold).
Punch
006
Number of jobs started in Punch mode. When Punch is set for a print job, the
P: counter increments. (See SP8-064-6.)
Other
007
(Reserved)
008 Inside-Flod
009 Three-In-Fold
010 Three-OUT-Fold
011 Four-Fold
012 KANNON-Fold
013 Perfect-Bind
014 Ring-Bind
[T:Jobs/PGS]
8071
These SPs count the number of jobs broken down by the number of pages in
the job, regardless of which application was used.
[C:Jobs/PGS]
8072
These SPs count and calculate the number of copy jobs by size based on the
number of pages in the job.
8073 [F:Jobs/PGS]
System Maintenance Section
*CTL [0 to 9999999 / 0 / 1 / step]
*CTL [0 to 9999999 / 0 / 1 / step]
*CTL [0 to 9999999 / 0 / 1 / step]
*CTL [0 to 9999999 / 0 / 1 / step]
*CTL [0 to 9999999 / 0 / 1 / step]
*CTL [0 to 9999999 / 0 / 1 / step]
*CTL [0 to 9999999 / 0 / 1 / step]
*CTL [0 to 9999999 / 0 / 1 / step]
*CTL [0 to 9999999 / 0 / 1 / step]
*CTL [0 to 9999999 / 0 / 1 / step]
*CTL [0 to 9999999 / 0 / 1 / step]
*CTL [0 to 9999999 / 0 / 1 / step]
2-747
Main SP Tables-8
D146/D147/D148/D149/D150