Ricoh D146 Service Manual page 1290

071 SDK3
[Authentication Error Code]
5481
These SP codes determine how the authentication failures are displayed.
System Log Disp
001
Determines whether an error code appears in the system log after a user
authentication failure occurs.
Panel Disp
002
Determines whether an error code appears on the operation panel after a user
authentication failure occurs.
5490 [MF KeyCard (Japan only)]
Job Permit Setting
001
Sets up operation of the machine with a keycard.
002 Count Mode Setting
5501 [PM Alarm]
001 PM Alarm Level
System Maintenance Section
*CTL 1: OFF
[0 or 1 / 0 / 1/step]
*CTL 0: Off
1: On
[0 or 1 / 0 / 1/step]
*CTL 1: On
0: Off
[0 to 1 / 0 / 1/step]
0: Disabled. Cancels operation
*CTL without a user code.
1: Enabled. Allows operation
without a user code.
*CTL -
[0 to 9999 / 0 / 1/step]
0: Alarm off
*CTL 1 to 9999: Alarm goes off when
Value (1 to 9999) x 1000 > PM
counter
2-571 D146/D147/D148/D149/D150
Main SP Tables-5