Ricoh D146 Service Manual page 1358

L-Edge Regist (1-Pass):
Front
For 1 path simultaneous duplex models only. Adjusts the front side sheet
010
through register. Adjusts to max. value in the adjustment range, when set value
is larger than adjust range. When finishing setting without defining, remains as
the last set value.
L-Edge Regist (1-Pass):
Rear
For 1 path simultaneous duplex models only. Adjusts the rear side sheet
011
through register. Adjusts to max. value in the adjustment range, when set value
is larger than adjust range. When finishing setting without defining, remains as
the last set value.
1st Buckle (1-Pass)
For 1 path simultaneous duplex models only. Adjusts pull out roller buckle
012
amount. Adjusts to max. value in the adjustment range, when set value is larger
than adjust range. When finishing setting without defining, remains as the last
set value.
2nd Buckle (1-Pass)
For 1 path simultaneous duplex models only. Adjusts scanning entrance roller
013
buckle amount. Adjusts to max. value in the adjustment range, when set value
is larger than adjust range. When finishing setting without defining, remains as
the last set value.
T-Edge Erase (1-Pass):
Front
For 1 path simultaneous duplex models only. Adjusts the front side trailing edge
register.
§
Value increase: add trailing edge to image.
014
§
Value decrease: erases trailing edge of image.
Adjusts to max. value in the adjustment range, when set value is larger than
adjust range. When finishing setting without defining, remains as the last set
value. Sets initial setting to -1.5mm instead of 0mm considering originals
shadow.
System Maintenance Section
*ENG [-5.0 to 5.0 / 0.0 / 0.1 mm/step]
*ENG [-5.0 to 5.0 / 0.0 / 0.1 mm/step]
*ENG [-3.0 to 3.0 / 0.0 / 0.1 mm/step]
*ENG [-2.0 to 3.0 / 0.0 / 0.1 mm/step]
*ENG [-5.0 to 5.0 / -1.5 / 0.1 mm/step]
2-639
Main SP Tables-6
D146/D147/D148/D149/D150