Ricoh D146 Service Manual page 1381

Main SP Tables-6
[Staple Position Adj: 1K FIN]
Adjusts staple position (main scan direction) for near side trailing edge parallel
6140
stitch / far side trailing edge parallel stitch.
§
Adjusting value to -: staple position moves toward front side of machine.
§
Adjusting value to +: staple position moves toward rear side of machine.
001 -
[Booklet Stapler Pos Adj:1K FIN]
Adjusts saddle stitch staple position (sub scan direction) of specified paper.
§
Adjusting value to -: staple position moves toward trailing edge of paper
6141
when intaking.
§
Adjusting value to +: folding position moves toward leading edge of paper
when intaking.
001 A3 SEF
002 B4 SEF
003 A4 SEF
004 B5 SEF
005 DLT SEF
006 LG SEF
007 LT SEF
008 12"x18"
[Sub-scan Punch Pos Adj:1K FIN]
Adjusts position of carry direction (sub scan direction) for punch.
§
Adjusting value to -: hole position moves toward trailing edge of paper when
6142
intaking.
§
Adjusting value to +: hole position moves toward leading edge of paper
when intaking.
001 JPN/EU: 2-Hole
D146/D147/D148/D149/D150
ENG [-3.5 to 3.5 / 0.0 / 0.5mm/step]
ENG [-3.0 to 3.0 / 0.0 / 0.2mm/step]
ENG [-3.0 to 3.0 / 0.0 / 0.2mm/step]
ENG [-3.0 to 3.0 / 0.0 / 0.2mm/step]
ENG [-3.0 to 3.0 / 0.0 / 0.2mm/step]
ENG [-3.0 to 3.0 / 0.0 / 0.2mm/step]
ENG [-3.0 to 3.0 / 0.0 / 0.2mm/step]
ENG [-3.0 to 3.0 / 0.0 / 0.2mm/step]
ENG [-3.0 to 3.0 / 0.0 / 0.2mm/step]
ENG [-7.5 to 7.5 / 0.0 / 0.5mm/step]
2-662 System Maintenance Section