Ricoh D146 Service Manual page 532

Hide thumbs Also See for D146:

Table of Contents

Service Call 501-584

D146/D147/D148/D149/D150

Error Name/Error Condition/Major Cause/Solution

Reset the paper

Remove the foreign matter

Replace the motor

Reset the connector

Replace the harness

Replace the sensor

Replace the control board for the optional side LCT

Replace the tray

Replace the timing belt

Replace the timing pulley

Replace the base plate

Side LCIT Paper Overload Error

During tray initialization, both the upper limit and lower limit are

detected for 3 times consecutively (up to 2 times consecutively,

the side LCIT transmits a "tray set fault" to the main machine.

Paper overload

Paper set fault

Limit sensor error/connector missing

Lower limit sensor error/connector missing

Harness broken

Bank control board defective

Foreign matter, such as paper scrap, is caught inside the