Ricoh D146 Service Manual page 1154

Edge Upper Limit:IBACC
012
Sets upper limit value of edge interval sampling count of P pattern by IBACC.
(Processes an error when exceeding upper limit)
013 Edge Upper Limit:RTP
Edge Lower
Limit:Potential Control
021
Sets lower limit value of edge interval sampling count of P pattern by electric
potential control. (Keeps searching when below lower limit value)
Edge Lower Limit:IBACC
022
Sets lower limit value of edge interval sampling count of P pattern IBACC.
(Keeps searching when below lower limit value)
Edge Lower Limit:RTP
023
Sets lower limit value of edge interval sampling count of P pattern RTP. (Keeps
searching when below lower limit value)
3628 [ID Pattern Timing :Set]
Scan: YCMK
001
Adjusts timing of Pro-Con pattern detect by P sensor.
Detection Delay Time
002
Adjusts alienation start timing of paper transfer.
Delay Time
003
Adjusts start write timing of P pattern.
MUSIC Delay Time
004
Adjusts start write timing of MUSIC.
System Maintenance Section
*ENG [10.0 to 13.0 / 12.0 / 0.1mm/step]
[50 to 80 / 70 / 0.1mm/step]
*ENG [4.0 to 7.0 / 5.0 / 0.1mm/step]
*ENG [7.0 to 10.0 / 8.0 / 0.1mm/step]
*ENG [2.0 to 5.0 / 3.0 / 0.1mm/step]
*ENG [-500.0 to 500.0 / 0.0 / 0.1mm/step]
*ENG [0 to 2500 / 0 / 1msec/step]
*ENG [0 to 2500 / 778 / 1msec/step]
*ENG [0 to 2500 / 150 / 1msec/step]
2-435
Main SP Tables-3
D146/D147/D148/D149/D150