Ricoh D146 Service Manual page 1391

Main SP Tables-6
6801 [1-pass Stamp Unit]
-
001
For 1 path simultaneous duplex models only. Sets installed/not installed of
DONE stamp unit.
[Ring Bind Sheet Conversion (Thick Paper)]
6810
-
001 -
[Extra Staples]
More than the standard number of sheets can be stapled. This SP sets the
additional number of sheets (This Setting + Standard Number = maximum
number of sheets).
§
If the number of the maximum for staples is increased, and the mechanical
6830
warranty of the unit can be guaranteed, then the setting can take effect
without changing the controller software.
§
However, assurance that mechanical performance can be guaranteed is
required before changing the setting to increase the staple load for more
than the maximum in the feed/exit specifications. Raising this setting
without quality assurance could damage the machine.
Staple positions other than
001
booklet stapling
2 Booklet stapling
Makes possible for staple to saddle stitch more sheets than basic amount.
002
Saddle stitch staple max. amount will be recognized as the total of this SP's
value and the basic amount.
D146/D147/D148/D149/D150
[0 or 1 / 0 / 1/step]
*ENG 0: NO
1: YES
[1 to 3 / 3 / 1/step]
1: 1 pages
CTL
2: 2 pages
3: 3 pages
*CTL [0 to 50 / 0 / 1/step]
*CTL [0 to 50 / 0 / 1/step]
2-672 System Maintenance Section