Ricoh D146 Service Manual page 1420

7852 [DF Glass Dust Check]
Dust Detection Counter
Records the times detecting dust at all points of front side scan position. When
001
there is a dust even when before starting the next job, consider as same dust
and doesn't count. Counts when SP4-020-001: DF scan glass part dust detect
front is ON.
Dust Counter Clear
Counter
002
For checking front side scan position move effect. Counts the times that strips
were avoided by detecting dust and move the sheet thrugh DF scan position.
Counts when SP4-020-001: DF scan glass part dust detect front is ON.
Dust Detection Counter:
Back
For Single Path simultaneous duplex models only. Records the times detecting
003
dust at all points of rear side scan position. When there is a same dust even
when before starting the next job, consider as same dust and doesn't count. *
Counts when SP4-020-011: DF
[Replace Counter]
7853
-
002 # PCU:K
003 # Dev Unit:K
004 Developer:K
025 # PCU:C
026 # Dev Unit:C
027 Developer:C
048 # PCU:M
049 # Dev Unit:M
050 Developer:M
System Maintenance Section
*ENG [0 to 65535 / 0 / 1/step]
*ENG [0 to 65535 / 0 / 1/step]
*ENG [0 to 65535 / 0 / 1/step]
ENG
ENG [0 to 255 / 0 / 1/step]
ENG
ENG
ENG [0 to 255 / 0 / 1/step]
ENG
ENG
ENG [0 to 255 / 0 / 1/step]
ENG
2-701
Main SP Tables-7
D146/D147/D148/D149/D150