Ricoh D146 Service Manual page 949

Main SP Tables-2-1
[Plain2:SwitchTimingTrailEdge]
2438
Sets switch timing for paper transfer ampere trailing edge correct per thickness /
line speed / printing sides.
001 PaperTransfer:Standard:1side
002 PaperTransfer:Standard:2side
003 Paper Transfer:Low:1side
004 Paper Transfer:Low:2side
[Middle:Bias:BW]
2443
Sets paper transfer ampere per thickness / mode (FC/BW) / line speed / printing
sides.
001 PaperTransfer:standard:1side
002 PaperTransfer:standard:2side
003 PaperTransfer:low:1side
004 PaperTransfer:low:2side
D146/D147/D148/D149/D150
*ENG [0 to 50 / 0 / 2mm/step]
*ENG [0 to 50 / 0 / 2mm/step]
*ENG [0 to 50 / 0 / 2mm/step]
*ENG [0 to 50 / 0 / 2mm/step]
[0 to (D146: 200, D147: 200, D148:
250, D149: 250, D150: 250) /
*ENG
D146: 22, D147: 22, D148: 28,
D149: 38, D150: 38 / 1-uA/step]
[0 to (D146: 200, D147: 200, D148:
250, D149: 250, D150: 250) /
*ENG
D146: 22, D147: 22, D148: 28,
D149: 38, D150: 38 / 1-uA/step]
[0 to (D146: 200, D147: 200, D148:
*ENG 250, D149: 250, D150: 250) / 11 /
1-uA/step]
[0 to (D146: 200, D147: 200, D148:
*ENG 250, D149: 250, D150: 250) / 11 /
1-uA/step]
2-230 System Maintenance Section