Ricoh D146 Service Manual page 525

SC No. Level
SC503-35 B
SM
Error Name/Error Condition/Major Cause/Solution
3rd Tray Transfer Error (LCIT)
§
Transfer end detection error
At right tray paper end (right tray lower limit detection, left
tray paper detection), left tray paper is transferred to the
right tray, but the left tray paper sensor is detected although
a predetermined time elapsed (transfer paper missing is not
detected), for 3 times consecutively.
(up to 2 times consecutively, LCIT transmits "tray set fault"
to the main machine)
§
Transfer motor error/connector missing
§
Left tray paper sensor error/connector missing
§
Harness broken
§
Bank control board defective
§
Paper overload
§
Foreign matter, such as paper scrap, is caught between the
left tray and the tray transfer motor
§
Paper set fault
§
Timing belt damage/dropout
§
Timing pulley damage/dropout
§
Transfer fence defective
§
Foreign matter, such as paper scrap, is caught inside the
left tray
§
Replace the motor
§
Reset the connector
§
Replace the harness
§
Replace the sensor
§
Replace the control board for the optional paper feed tray
§
Reset the paper
§
Remove the foreign matter
§
Replace the tray
§
Replace the timing belt
§
Replace the timing pulley
§
Replace the transfer fence
5-51
Service Call 501-584
D146/D147/D148/D149/D150